I have for sale a very nice Bally CENTAUR pinball machine.
The machine that I'm offering for sale is working 100% OK without errors.
Backglass is original and in near mint condition. It has a new metal lift bar and plastic trim.
Playfield installed is new (CPR Gold) and HAS NOT BEEN PLAYED except to test the mechanisms and switches. The surface is clearcoated.
All the mechanisms (bumpers, slingshots, drop target assemblies, flippers, etc.) were fully disassembled and cleaned before being installed on the new playfield.
All the switches were also cleaned with new caps installed where originally used.
Flippers were rebuilt (new E.O.S., new coil stops, new plungers, new flipper switches on cabinet, new bats, new buttons, etc.).
All new #44/#47 lamp sockets were installed on the backbox panel and playfield.
LED bulbs were installed throughout the machine (behind the backglass, under the plastics, and on the bottom side of the playfield). Three small adapter boards were installed on the lamp driver board for LED compatibility.
The full set of plastics is new.
The 12 drop targets and the six rollover guides are new.
The two bumper caps, rings, bodies, and skirts are new.
A new set of rubbers was installed.
The backbox and lower cabinet were fully repainted matching the original artwork and colors.
The interior is extremely clean and all new labels were installed throughout.
CPU, power supply board, "Say It Again" board, and solenoid driver board are new.
The other boards are excellent originals made by Bally. All of them were serviced and are working without problems.
The set of displays is working 100% OK with excellent brightness and without segments or digits missing or always "on".
Sounds and speech are clear (Squawk & Talk sound board was recapped) and the echo from the "Say It Again" board is working correctly.
The playfield glass is new.
Metal side rails are new.
A new coin door skin was installed. The rear side was fully disassembled and every piece was individually gone through.
Front door and backbox have locks with the corresponding keys. A plastic keychain is also included.
Machine is programmed for free play, but two coin mechs for quarters are included and they are working without problems.
Legs were repainted and they look like new.
Original coin box is present.
Manual with the schematics is also included.

More pictures of the machine can be viewed in the following album:
https://photos.app.goo.gl/YqRprWP3Um48KmwZ6

This pin is located in Ogden, UT 84405 and can be shipped through STI/CRST/NAVL at buyer's expense.

NO TRADES

Thanks for looking!

Robert Urbanowicz
PINBALLMANIA LLC
http://www.pinballmania.com
http://www.facebook.com/pinballmaniallc