The machine that I'm offering for sale is working 100% OK without errors: general illumination, switched lamps, solenoids, flippers and all the mechanisms were revised and they are working correctly.
Backglass (made by John Greatwich) along with the metal lift bar are new.
Playfield installed on this machine is new (not perfect: seconds quality made by John Greatwich).
All the mechanisms (Bumpers, Slingshots, Drop Target Assemlies, Flippers, etc.) were fully disassembled and gone through before being installed. All the switches were also cleaned with new caps installed where originally used.
The four flipper assemblies are new.
All new lamp sockets were installed under the playfield.
The full set of plastics is new.
Bumper caps are originals and unbroken (hard to find). The three bumper bodies and skirts are new.
The 11 drop targets were replaced with new ones.
LED bulbs were installed throughout the machine (behind the backglass, under the plastics, and on the bottom side of the playfield). The three small adapter boards were installed on the lamp driver board for LED compatibility.
A new set of rubbers was installed.
The lower cabinet and the backbox were fully repainted.
The interior of the backbox and the lower cabinet are extremely clean.
All new labels were installed inside the backbox, lower cabinet, and playfield.
With the exception of the power supply board which is new, the boards are originals made by Stern (all of them are in excellent condition and working 100% OK). A remote battery holder was installed for the CPU.
Sounds are clear.
The set of displays is working 100% OK with excellent brightness and without segments or digits missing or always "on".
The playfield glass is new.
Metal side rails and lockdown bar were polished.
Front door and backbox have locks with the corresponding keys. A plastic keychain is also included.
Two coin mechs for quarters and one for SBA dollars are included. They are working without problems.
Coin door skin and the four legs were repainted and they look like new.
Original manual & schematics is also included.

More pictures can be viewed in the following album:
https://photos.app.goo.gl/o8gWozL4EUTprodB9

This machine is located in Ogden, UT 84405 and can be shipped through STI/CRST/NAVL at buyer's expense. Depending of your location a lower shipping rate may be available through a different freight company (pm me for more details).
I can also ship worldwide for a reasonable rate.

NO TRADES

Thanks for looking!

p.s.: The Stern QUICKSILVER that can be seen in some pictures was sold.