Trades Considered. Especially interested in Whirlwind, This Simpsons Pinball Party, and The Adams Family (+/- cash). Extremely spiffy Jurassic Park. This machine is amazingly fun and in overall great condition with full LEDs, Chad 6.0 code, an amazing playfield and cabinet, and more mods than you could shake a stick at including the unobtanium loopback combo mod.

If you’ve never played one, the theming and animations are great, the dinosaur eats the ball, there is a 6 ball multiball, the layout is a ripoff of one of the all time greatest (Whirlwind) and the code is a ripoff of one of the all time greatest (The Adams Family). My kids love this thing and love showing off one of the greatest toys in pinball (the TREX eating the ball and snapping it’s jaws really is impressive).

I have done my best to provide as many pictures, videos, and as much information as I could, but would be happy to answer your questions.
What I am looking for-
In order of preference:
1. Whirlwind (with cash from you)
2. The Simpsons Pinball Party (with cash from me)
3. The Adams Family (with cash from me)
4. Other Trades (I’m open)
5. Cash
*I am not looking to ship at this time.
*Machine is in walkout basement with small grass hill to road

More information than you could ever want about the machine is below:
Videos of this machine:
Tour of this exact machine: https://www.youtube.com/watch?v=sQC_6BFMSdA&feature=youtu.be
Unwatchable gameplay video of this exact machine https://www.youtube.com/watch?v=DX05LEGEjGo&feature=youtu.be
Rules Explanation on this machine https://www.youtube.com/watch?v=JCB0H3ik6a0&feature=youtu.be

The good:
-Fantastic playfield with no noticeable wear anywhere on the playfield and only slight wear on the shooter lane.
-All original boards.
-Cabinet 9/10 (my opinion, take it for what it’s worth)
-Playfield 9/10 (my opinion, take it for what it’s worth)
-Original Topper
-Lots of great mods (that you can remove if you hate)
-Great seller!
Mods:
-LEDs in backbox
-COMET LEDs for all flashers
-COMET 2 SMD LEDs in playfield
-Chad 6.0 Code (this randomizes the order of the modes)
-Backlight backboard (When Dinosaurs Ruled The Earth and scene behind)
-Lit T-Rex Scoop
-Titan Rubbers
-Power Tap in Cabinet
-Full Set of plastic protectors already installed
-Modfather Jeep with headlights that flash in lieu of flasher (original plastics included if you prefer)
-Modfather trees
-Powered Subwoofer
-Tilt Side Blades/Art
-Raptor figurine on playfield by kickback
-Unobtainum lit-combo mod signs (these are the signs above the scoops)
-Full cliffy set installed with an extra spare for your a hole
-Hand painted bumper caps with Jurassic Park logo (originals are solid yellow and you can’t see the dinosaur very well)
-Jurassic Park Keychain (From Amazon!)

Repairs/Alterations:
-Repaired a burnt connector on the backside of the shaker board which somehow is partially responsible for moving the T-REX left to right. This issue was fixed about 3 months ago and the T-REX has worked flawlessly since then (I play almost every day).
-Black touchup paint on cabinet
-Replaced right flipper leaf switch
-Squished a diode in the ball trough when lowering playfield, had to bend back up.
-Put a post (removable) in the left outlane pilot hole (see pictures) because I suck at pinball and wanted to havea chance (along with my kids).
-Newman’s fingers look like hot dogs (all machines have this issue).
I have close to 50 posts in the Jurassic Park Owners Club if you want to see my troubleshooting steps and alterations I’ve made to the machine. https://pinside.com/pinball/forum/topic/jurassic-park-club?tq=&tu=sataneatscheese

The bad:
-1 cracked plastic above the right flipper (replacements/repos are available, and it is mostly blocked from view by the jeep… see photos).
-A tiny little bit of mylar is lifting by the left sling
-Slight wear in the shooter lane (better than 95%, but will still point out)
-Slight wear by the T-REX saucer (better than 95%, but will still point out)
-A lockout bar was installed at one point in time, but has been expertly filled and color matched with paint (see pictures, not noticeable unless pointed out).
-The scoops are covered with cliffys, but assume there is wear in the holes if you pull the cliffy’s back.
-Small crack in the topper by one of the screw holes.
-Pincup not included
-Newman’s fingers look like hot dogs (all machines have this issue).
Please feel free to ask questions, post trade offers, or comment on the awesome quality of the keychain.
Thanks for reading my essay!