Up for sale is my Flash Gordon. I picked this game up and have spent countless hours and a bunch of $ to get it to where it is today. Unfortunately, I don't love to play it, even though it is a brutal game and plays very fast. I have numerous photos other than what is shown. Some before and after photos for comparison. I would prefer not to ship.

PROS:

Hardtop installed
Comet 2SMD cool white LEDs in backbox and GI
Comet 2SMD color matched in all inserts
Pini-tech LED displays with red/ and or amber filters
Cabinet sanded down and repainted
Pinball Pimp stencil kit used for stenciling
New chrome legs with new leg levelers
New playfield plastic screws and stainless acorn nuts
Slingshot plastic protectors
CPR repro non-mirrored backglass
CPR repro plastics set
All new flippers bats
All three flippers rebuilt
All new coil sleeves
New pop bumper white bodies and red skirts
Weebly MPU board
All new locking header pins on boards
New dual speakers
New playfield glass
New Titan translucent rubbers
Sound board rebuilt by Allan at Ardvark
Coin door disassembled, cleaned and reinstalled with new coin door decal
New correct shooter rod and springs
New flipper buttons and flipper switches
Microswitches installed on all outlanes and shooter lane
New polished pinball
Titan Lockdown receiver decal
“Power plate” removed, cleaned, repainted and reinstalled
New Tilt assembly mounting board
New backglass trim
Cabinet wiring organized better
New black Reese Rails installed
Shooter lane 2Pac cleared
New clear (not opaque) playfield inserts
New star-rollover inserts and "stars"
New hot stamped drop down targets
Drop down assemblies removed, cleaned, reinstalled and adjusted
Saucer assembly removed, cleaned and reinstalled
All switches cleaned and adjusted
All switches have new diodes installed
Many parts tumbled to freshen up
New backbox board connectors re-pinned
New coin door and backbox locks
New strobe bulb installed and works properly

CONS:

A couple wire jumpers on back of light board, auxiliary light board, and Talk & Squawk board
One small (owner induced) blemish on Hardtop 6” above right lower flipper
It currently plays 99% (One switch not registering).