I have for sale a very nice Bally MEDUSA pinball machine.
The machine that I'm offering for sale is working 100% OK without errors.
Backglass is a new old stock piece made in 1981 (not a reproduction).
Playfield installed in this machine is new (made by CPR) and it is clearcoated.
All the mechanisms (bumpers, slingshots, drop target assemblies, flippers, etc.) were fully disassembled, cleaned, and polished before being installed on the new playfield. All the switches were also cleaned with new caps installed where originally used.
Flippers were rebuilt (new E.O.S., new coil stops, new plungers, new flipper switches on cabinet, new flipper bats, etc.).
New lamp sockets were installed on the bottom side of the playfield playfield.
LED bulbs were installed throughout the machine (behind the backglass, under the plastics, and on the bottom side of the playfield).
Playfield apron/arch along with the shooter gauge are new.
Set of plastics is new.
The 11 drop targets are new.
The four bumper caps, rings, bodies, and skirts are new.
A new set of rubbers was installed.
The backbox and lower cabinet were fully repainted.
The interior is extremely clean and all new labels were installed.
Power supply board is a reproduction. The other boards are originals made by Bally (all of them are in excellent condition and working 100% OK). A remote battery holder was installed for the CPU.
The set of displays is working 100% OK with excellent brightness and without segments or digits missing or always "on".
Sounds and speech are clear.
The playfield glass is new.
A new coin door skin was installed. The rear side was fully disassembled and every piece was individually gone through.
Front door and backbox have locks with the corresponding keys. A plastic keychain is also included.
Two coin mechs for quarters are included. They are working without problems.
Legs were repainted and they look like new.
Manual with the schematics is also included.

More pictures of the machine can be viewed in the following album:
https://photos.app.goo.gl/yXzqpLEYvacFb6W47

This pin is located in Ogden, UT 84405 and can be shipped through STI/CRST/NAVL at buyer's expense. Depending of your location a lower shipping rate may be available through a different freight company (pm me for more details).
I can also ship worldwide for a reasonable rate.

NO TRADES

Thanks for looking!

Robert Urbanowicz
PINBALLMANIA LLC
http://www.pinballmania.com
http://www.facebook.com/pinballmaniallc