I have for sale a very nice Bally FRONTIER pinball machine.
The machine that I'm offering for sale is working 100% OK without errors.
Backglass is original and it is in excellent condition. New plastic trim and metal lift bar were installed on it.
Playfield installed on this machine is a new old stock piece made in 1980 (the playfield for this model has never been reproduced). It is clearcoated and the surface is very shiny.
All of the mechanisms (Bumpers, Slingshots, Drop Target Assemlies, Flippers, etc.) were fully disassembled, cleaned, and polished before being installed on the new playfield. All the switches were also cleaned with new caps installed where originally used.
Flippers were rebuilt (new E.O.S., new coil stops, new plungers, new flipper switches on cabinet, new flipper bats, etc.).
All new lamp sockets were installed under the playfield.
The full set of plastics is new.
The three bumper caps, bodies, and skirts are new.
The six drop targets are new.
A new set of rubbers was installed.
The lower cabinet and the backbox were fully repainted.
The interior of the backbox and the lower cabinet are extremely clean.
All new labels were installed inside the backbox/lower cabinet and under the playfield.
With the exception of the power supply board which is new, the boards are made by Bally (all of them are in excellent condition and working 100% OK). A remote battery holder was installed for the CPU.
The set of displays is working 100% OK with excellent brightness and without segments or digits missing or always "on".
Sounds are clear.
The playfield glass is new.
Metal side rails are new.
A new coin door skin was installed. The rear side was fully disassembled and every piece was individually gone through.
Front door and backbox have locks with the corresponding keys. A plastic keychain is also included.
Two coin mechs for quarters are included. They are working without problems.
Legs were repainted and they look like new.
Manual with the schematics is also included.

54 pictures of the machine can be viewed in the following album: https://photos.app.goo.gl/F17ujk39PnLW1emw7

This machine is located in Ogden, UT 84405 and can be shipped through STI/CRST/NAVL at buyer's expense. Depending of your location a lower shipping rate may be available through a different freight company (pm me for more details).
I can also ship worldwide for a reasonable rate.

NO TRADES

Thanks for looking!

Robert Urbanowicz
PINBALLMANIA LLC
http://www.pinballmania.com
http://www.facebook.com/pinballmaniallc