New! Dark mode!

Browsing Pinside at night? Getting tired of all the white? Switch to dark mode using the button in the top right (or CTRL-B)!

ARCHIVED

Archived ad

Pinside keeps a record of old ads in its Market Archive, for historical purposes and as a price reference. This ad has been ended by its seller and is now archived.


Price

$ 2,000 (Firm)

Price is firm


for sale

For sale: Sorcerer

Added: January 28th, 2019 Ended: January 30th, 2019
Condition: Fully shopped/refurbished

Linked to game



Item description

Up for sale is my beautiful Sorcerer pinball. Picked up a new game, so I need to make some room. I’ve only had this a few months, but in that time I’ve done the following in that time….

The “bad” (not really anything bad, but honesty is the best policy) …

The playfield has been touched up a bit in a few areas by my amazingly artistic wife. Nothing too bad or major, it was much better than most sorcerers to begin with and was probably just fine for most people’s tastes. She color matched everything perfectly. Then I spot clear coated the touchups with automotive clear coat so everything will stay where it is. She did a great job, you really gotta look hard to tell where she touched anything up.That’s it for the bad.

The Good and everything else!!...

The backglass is absolutely amazing!! No flaking or bubbling, colors are rich and vibrant! The cabinet is solid with a few typical bumps and bruises but nothing major or structural and better than most.
I’ve completed the following….

Installed the “missing” fuse blocks for the bridge rectifiers, performed the system 9 Mosfet MPU lamp section resistor delete mod WITH voltage split (no more “oven temperatures” in the head!), replaced ALL electrolytic caps on the power supply (Power supply rebuilt) and MPU while chasing down the dreaded system 9 hum (it’s now gone!), reflowed all the header pins and ground contacts on the back of the boards, replaced the volume pot, replaced the toasty connector for the lamps on the MPU. No acid damage, and installed a new lithium battery.

It has been fully shopped…stripped down completely novus buff and carnauba waxed, rebuilt with new flipper coil sleeves, new star posts, new lane guides, new rubbers, new flipper bats, new balls, new X-Pin displays, freshly painted legs with new leg bolts and levelers.
Everything looks sounds and works perfectly. Gonna miss it, but room is room, so something has to go.

She will be missed but life goes on!

As always PLEASE as questions. I will happily share a video and take more pictures if you need it. No one likes surprises!

Shipping is OK, if you set it up i'll get it ready. First floor walkout with no stairs.

*I can only get on pinside at home, it's blocked at work, so I apologize for any delays getting back to you.*


Item photos

20190127_093503_HDR (resized).jpg
20190127_093527 (resized).jpg
20190127_093531 (resized).jpg
20190127_093540 (resized).jpg
20190127_093548 (resized).jpg
20190127_093601 (resized).jpg
20190127_093649 (resized).jpg
20190127_093657 (resized).jpg
20190127_093728 (resized).jpg
20190127_093732 (resized).jpg
20190127_093735 (resized).jpg
20190127_093742 (resized).jpg
20190127_093747 (resized).jpg

Photos not showing? Make sure your ad blocker plugin is not hiding them.


Contact

Note! This is an archived ad. No longer for sale!


Seller insights

These are Oldschool77's all time market stats.

All ads

0
22

Archived ads

16
6

Success

0
22

Feedback score

5
80.0%

Go to Oldschool77's stats page

Listing result

The seller marked this ad as "not sold". The item did not sell through Pinside so there's no listing result.

Item location

Virginia Beach, VA, US

Forum

Discuss this ad on the Pinside forum

Embed this ad in a forum post