I'm selling 1977 Bally Night Rider pinball machine. I completely stripped everything off the playfield, installed new pop bumper bodies, caps, rebuilt flippers and more. All rubber parts were replaced and 4 coats of wax was applied. All parts were cleaned and tumble polished. There is some typical wear on the PF. The cabinet was touched up slightly. The frame around the back glass was repainted. The back glass art is very good, a couple light scratches. It was sealed. All the boards were serviced and upgraded as needed. The displays are working as they should. It has new leg levelers, locks, shooter rod springs, electrical connector pins, back glass trim including lift bar, leg bolts, spinner decals, some LED light bulbs and more. A copy of the original operating manual is included. Works with quarters or I can set it for free play. Cabinet bottom panel has veneer separation and holes from a previously installed speaker from a sound board. Delivery and set-up is available within 100 miles of zip 16870 for a fee. Trades possible for other Bally project games.