Advertised as "shopped/refurbished" as my restorations typically deviate from original.
For example on this Atlantis the legs were painted in "sandstone" texture to accentuate the them of the pin, the wireforms and major metal components were plated in BRASS not chrome... just things like this.
So, here is the GOOD:
Fresh restoration including clear coated playfield
LEDs
Almost all coils replaced with NEW ones
All slingshot and misc switches are NEW
TITAN rubbers
REESE rails
Fresh cab decals
NVRAM
Flippers rebuilt
Brass major components
Brass screws / nuts where possible to continue the "underwater" motif
NOS MPU board updated with NEW caps
Pinscore LED displays
Aluminum BB liner replaced OEM cardboard style (for improved grounding)
New sheet of PF Tempered glass


The "bad"
It's not an imamaculate Baywatch
Coin mech's are incomplete thus don't work (game set to free play)
Translite has minor tear (taped to prevent further damage) a couple burn spots
Restored by an amateur pinhead
OEM plastic ramps as they new ones are currently unobtanium
Shooter lane at eject hole has typical minor discoloration
One insert had its decal slip during the clear coat and one of the decals on the side of the cab got a knick in it. Images of both have been added to those below.

Shipping via carrier of your choosing (and your cost) available, sample picture supplied of how I prepare pins for shipping
If you have not seen the restore thread:
https://pinside.com/pinball/forum/topic/the-bally-atlantis-that-i-discovered

Thanks for looking!