Jurassic Park DIY Park Entrance Gate

I am selling a few JP entrance gates I had made for my JP game. They are 4" x 3.5" and done in gray plastic. The gate are seperate from the columns. They will need to be painted and mounted on the end of the ramp using the existing gate plastic mounting metal. If you really ambitious, like me you will buy the micro leds to install on the gates at torches. I purchased mine here https://www.ebay.com/itm/0402-SMD-LED-pre-wired-Pre-soldered-micro-litz-lead-20cm-3V-9V-12V-15V-Model/ ########## [phone number removed]28?ssPageName=STRK%3AMEBIDX%3AIT&var= ########## [phone number removed]80&_trksid=p2060353.m2749.l2649
This part requires that you drill small holes in the gates where the torches would be installed, run the wire down the column and under the playfield to the insert lights. I connected mine to the lamps that are normally on the top of the plastic and the free standing lamps beside the gate. That is why in the pic some of the torches are not lit.
Again, this is a great DIY project and not too difficult to install.

Also selling some JP crates. They will also need to be painted, be creative! I glued a small T rex on the end so it looks like he is coming out of the crate. Normally the crates are just finished on the ends.
The gates are $40. + shipping and the crates will sell for $26. plus shipping.