Working Tales of the Arabian Nights. I went through the game and replaced the battery holder. Everything is working. I replaced all the controlled lamps (except the B and A under a mechanism) to ensure they all worked.

The Skill Shot metal will need to be replaced with the two decals. It is missing the lower lips to each hole.

The Orb hole will need a Cliffy protector. The Make A Wish hole and two magnets should also get Cliffy protectors.

There is a touchup between the "A" and "Z" in Bazaar in the red area.

The plastic above the scoop and lock has some slight cracks but looks okay.

There is a slight crack in the spiral plastic ramp above the metal plate.

The left purple inlane/outlane divider has two holes drilled into it for some unknown reason. Cosmetic but pointing it out.

Cabinet looks pretty good. There is a small piece of wood under the lock bar at the left front side of the cabinet that is missing and repainted black. Barely noticeable but there.

The red plastic under the lamp has stress cracks by the two yellow posts.

I cleaned the play field, cabinet, legs, added the pincab leg protectors and trough jam protector.

The game comes with an original manual, operators handbook, and WPC-95 schematic book.