So I have decided to let go of my P-roc project.

I picked up an Alien Poker a few years ago at PAGG without the main boards or the back glass. I have refitted the game with a P-roc programmable pinball controller, and what is popularly known as a "Snux" system 11 driver board. The original power supply is supplying power to the controller boards, and the coils and lights. I also have a small laptop LCD screen I was going to mount to the game to use a score display (it has a controller and hookup to my laptop via a HDMI cable). The entire mess can be controlled from my laptop, and I have been programming it using Mission Pinball Framework. To this date, I have been able to create a basic game based on the original Alien Poker rule set. While I would consider the software to still be in the beta stage, it does work, and is stable.

The downside is the cabinet and playfield are rough. The cabinet is out of square and the playfield is hard to get up and down, and the bottom needs to be remounted. The playfield is pretty worn, and honestly may be better if it were sanded down and made into a white board. All the plastics are there (although some are broken). The main mechanical issue is with the 5 bank drop target. Some of the holes on the guides are stripped out. Right now the 5 bank drop target is out of the machine and sitting in a box.

I would like to $550 for the setup. This would include the Alien Poker, with all the board shown. It also does have playfield glass and a lock bar (not shown). I will also include the LCD screen, and I will give you a copy of my latest code.

The machine is located in near Tehachapi, California. Sorry, no shipping.