I've been restoring pins for the past few years, I was a professional mechanic at Lincoln-Mercury and well trained. I will work directly with you on a weekly basis giving you progress reports and pictures. Typically I can restore an entire machine within 2-3 weeks depending on how much work is involved and provide the level of service you would expect for your expensive investment. I take a lot of pride in my work, have an artist eye and I am extremely meticulous. I can do almost all aspects of working on a machine aside from intricate board repair, but I will handle that for you if needed sending the board out to a reliable engineer or finding a replacement. I can do electrical maintenance and install led displays, color DMD kits, replace worn connectors, replace caps, re-flow header pins, varnishing switches, replace coils, flipper rebuild kits, any mods etc. I can shop out a beautiful led color pattern for your machine, repair flaking or lifting backglass using clear translucent enamel paint. I can square up your cabinet, create custom masks, respray it just as the factory did. I can also use high quality enamel paints and touch up unsightly scars on the cabinet for a more cost efficient solution. I can swap in a NOS or reprinted playfield for your worn one along with completely rebuilding the playfield by polishing all the stainless and cleaning and varnishing all the switches and components. I touch-up playfields with high quality acrylic paint. I clear coat playfields by applying a 2 part automotive grade (SM2K) high gloss clear, 4-5 coats, block sanded between coats, then wet sanded and polished out to a brilliant shine. The level of service is up to you and how much you are willing to invest in your pin and myself. My prices are reasonable and you can expect professional service and communication. Please call, text (###)###-#### [phone number removed] or send me a pm thank you.