FS - thin wall clear tubing.

I've sourced the thin wall clear tubing you find in so many games and am offering up four different sizes.

The smallest size is used on pop bumper lamp leads in WPC and WPC-95 games and is also used to cover diodes when those lamps are controlled.

The medium size would be used as short protection when soldering wires to coil terminals, switch terminals and the like. You find this used commonly on drop target banks in classic Bally games like EBD.

The large size would be used to cover the bare ground wire that runs from the head to the cabinet in WPC-95 games. Also used to protect the shooter lane wires in WPC games.

The X-large size is what you need to cover the power wire harness in WPC-95 games. It's in the bottom cabinet and runs on the right side from the power box to the transformer in the back. (Pic coming soon)

Price is by the foot.

Small - $.60

Medium - $.80

Large - $1.20

For those wondering what you need based on the game title, here's the scoop and this is strictly Williams/Bally games.

The small is way more than you'll need but it's so cheap, just buy it.
You don't really need the medium unless you like adding short protection on things. Again, it's so cheap, blah blah blah.
The large may be more than what you need based on your game. Some use more than others so I've listed the most you'd need.

WPC games:

3' - small
3' - medium
4' - large

WPC-95 games:

3' - small
3' - medium
6' - large


Shipping is a flat $6.00, unless you order a shit load. Then it's $12.00. I'll let you know when you have a shit load.

Payment methods include Venmo and personal check. If paying by check, your order will ship once the check has been received.

No Paypal!