For sale: Miss-O (Williams, 1969) — With EM Score Keeper Mod

A Pool/Billiards themed, Miss-O (Williams, 1969) Pinball Machine.

Gameplay:
This EM pinball machine has a 8 Ball theme and art package, perfect for any game room. Try to hit targets A, B, C, and D which lights the Horseshoe Loop for an Extra Ball.
The Horseshoe is also worth big points (500), but very risky being centered on the playfield. Kick out holes are very helpful in advancing the pool ball numbers and awarding 100. Hitting either target A or D lights a bumper, increasing its hit value to 10. Keeping the ball up by the bumpers is key to racking up the points (no pun intended) . The bumper between the flippers saves the ball from going down the drain more often than not and adds some unique gameplay.

Overall, a beautiful game that was a blast for fix up. A lot of love has gone into this restoration.

I Installed the EM Score Keeper mod. This pin will now save your high scores right to the machine! Enter scores using the coin return button and flipper buttons. Scores and initials are displayed on an OLED display on the apron. I am the creator and distributor of these. You can’t get them anywhere else! TheEMScoreKeeper dot com.

This pin has been completely serviced and shopped. For a full list of what has been done, see below:

-New Complete Flipper Rebuild.
-New Playfield Rubbers installed.
-Warm LEDs installed on the playfield and backbox. Shouldn’t ever need to replace these bulbs again.
-All switches cleaned, polished, and adjusted. Switch stack screws tightened.
-All steppers we’re taken apart, cleaned, and put back together. Renewed.
-All Score reels were disassembled, cleaned, and restored.
-Score motor cleaned and properly lubricated.
-Coil sleeves replaced on steppers, score reels, and flippers.
-New Locks on Front and Back Doors.
-New Pinball Ball.
-New Leg Levelers.
-All playfield plastics cleaned and polished. Complete, original plastics set.
-Playfield paint touch ups around inserts.
-Playfield cleaned and waxed.
-New (White) Bumper Skirts installed on all Bumpers.
-Cabinet body cleaned and vacuumed, inside and out.
-All metal (side rails, coin door, legs, lockdown bars) has been cleaned and polished.
-All new fuses installed.
-New electrical cord installed. Transformer is grounded (as it should be).
-New Metal Bumper Ring installed on one bumper that needed it.
-New Leg Bolts.
-New Lock Relay Coil installed.
-4 Additional New Coils installed on relays that needed it.
-1 New “A” Bumper Cap installed. Previous one was broken.

**FREQUENTLY ASKED QUESTIONS**
Q: I’ve never had a pinball machine. Do they break easily?

A: EM Pinball machines are some of the most reliable and bullet proof pinball machines available. Even after 50-70 years, they typically stop working because they sat for 30 years and didn’t get played, collecting dust. All they typically need is a good cleaning and adjusting of the switches and they start right up again for many, many years.

Q: Can it be taken a part so I can fit it in my car?

A: Yes, the backbox can be removed with 4 bolts and comes off the cabinet. The legs can be removed with 2 bolts on each leg. Once it is disassembled, the pinball machine can easily be carried or moved with a dolly.

Q: If something does need replacement, are parts available to be bought?

A: Yes! The Pinball Resource has parts for nearly any pinball machine at reasonable prices and fast shipping. You can also contact me if you’d like parts. I’m happy to help.

Q: Can I erase the High Scores that are saved to this pinball machine’s High Score Keeper?

A: Yes! By holding the Coin Return button (located on the coin door) down for 30 seconds, it will erase the high scores.

Located in Lakeville, MN.