A nice, restored Fish Tales with very low plays.

While this is a fully restored machine there are a few things to point out for the purist. First, the large left-side plastic was missing and not available at the time of restore so a piece of acrylic was used. It looks pretty good, but this piece is easy to replace if you can locate it. Second, the speaker panel has the side-lit illumination kit, so it is not "factory". It looks nice when lit-up, but it can also be restored to factory if desired. Lastly, while the left-side reel casting (plunger) was replaced with a new unit, the right-side cast was not available at the time. The right-side cast does appear to be available today if you wish to replace it but what's there is quite presentable.

The machine looks mostly like it would have when it was un-boxed given the attention to detail, and it plays wonderfully.

Cabinet:

-100% stripped down to wood, fully sanded, filled, painted and sanded again to be smooth
-All new side art; perfect razor trim
-New backbox rear decal
-All new matte black paint
-New Ground braid in cabinet and backbox
-New fish dome
-Coin door 100% rebuilt and working for coinage with new inserts and LEDs
-New hinges and legs/leg bolts/leg bolt receivers
-All decal marking replaced with replicas including serial numbers, warning labels, inspection labels, CE mark, cabinet maker decals etc.
-Lock down assembly fully rebuilt, sanded and brushed
-New flipper buttons and switches
-New start button switch with LED
-LED rings around speakers
-Original orange DMD with no bad dots
-Full PinWoofer Super Kit
-New Rottendog IO Driver Board and DMD Display Driver

Playfield:

-New CPR reproduction playfield; playfield protector was installed during rebuild so no ball has ever touched the main playfield areas that are protected
-All stainless diverters were sanded and brushed
-New mini-playfield
-New mini-playfield acrylic ramp
-New plastic set with protectors
-New playfield toy decals; fish house, reel, etc.
-Titan rings throughout
-New T-Nuts, nuts, screws and washers throughout (all posts were wet-tumbled)
-Apron is original and perfect with new trough decal
-All playfield targets and target switches replaced
-All coil sleeves replaced
-All coil wrappers replaced
-All springs replaced
-Wiring harness completely removed, washed and inspected. All solder joints inspected and repaired as needed. Many coils and micro-switches were replaced as needed
-100% new LEDs
-All mechanical actuators fully rebuilt, and have new switches including slings, jets and flipper assemblies, catapult, other. Plays lively and fast
-VUK and gate diverters working perfectly.

Game is fully adjusted and plays great.

Buyer to arrange for packing and shipment / pickup. Payment by TT / Wire or Cashier's Check (check requires five full business days to clear).