$2900 cash only. Firm on price unless it does not generate much interest at this price.

This classic system 11 is recently shopped, plays 100%, no errors, strong flippers.

I've had the game in my collection for 3.5 years, but it is time to move it on for other games.

MORE PICTURES:
-------------
https://www.dropbox.com/sh/3ok3kvq8nnhtuay/AACC5gz3t54bTo17Lm9lze1Ya?dl=0

THE GOOD:
---------
Playfield is very nice. Very tiny wear at eye kickouts. Factory mylar.
Backglass very nice.
Apron is very nice.
Game is very clean. Some grunge inside cabinet bottom though.

Full topside playfield teardown and tumble of all metal parts.
Underside action mechs disassembled, cleaned & serviced, new sleeves, etc.
2 fuses added to protect bridge rectifiers, per pinrepair/pinwiki.
All fuses verified for proper amperage rating.
NEW special solenoid saver/fuse board (from barakandl/weebly).
No credit dot/errors.
All lamps working.

NEW PARTS:
NEW plastics set from CPR
NEW topper (repro from pinsider "ibjeepin" - https://pinside.com/pinball/forum/topic/pinbot-topper-group-buy/page/4#post-4092398 )
NEW mini playfield from CPR
NEW legs - system 11 style
NEW leg levelers
LEDs (Comet warm white) in playfield GI and backbox GI
LEDs (Comet warm white, non-ghosting) in playfield CPU and backbox CPU lamps
LEDs pop bumper discs from Comet (clear pop bodies as well)
NEW titan silicon rubber kit (red & blue)
NEW flipper bats
WPC style flipper mechs
NEW flipper cab switches
NEW plastic posts
NEW drop target stickers
NEW shooter housing
NEW shooter rod
NEW repro instruction cards
Lockbar receiver finisher/sticker

Original manual included

THE BAD:
--------
Once in a while it will boot to a RAM error, but power cycling starts the game every time if so. Been like this ever since I've had the game and has not gotten worse. I suspect installing NVRAM will solve this problem, but I am not an expert on MPU behavior.

Battery pack is still on the MPU board. NO battery leakage, but would be better if batteries were mounted remotely to avoid future leakage problems. I intended to install NVRAM but never did, opting to change AA's annually.

A hole drilled into rear of cab, presumably to mount a plate to secure head to main cab. All this nonsense removed in lieu of a new latch and proper head bolts.

LOGISTICS:
----------
Easy pickup from walk-out basement. I can assist and provide tools, dolly, etc. for moving.

Willing to discuss local delivery if needed.

I've been part of the DC area pinball scene (FSPA) for 20 years. Please see my pinside profile for transaction feedback:
https://pinside.com/pinball/community/pinsiders/jeffc/feedback


Thanks,

JeffC