I recently purchased a project Jokerz!, I am new to home use pinball and thought this was an easy way to add another game to my budding collection. I was under the impression it was working but needed minor work from the pictures I was sent. It turns out I am in way over my head and need to cut my losses. Playfield has new rubbers and 95% leds installed. I have the original board (acid damage) and a replacement board that once plugged in it blew a resistor/transistor thing on the board. Cabinet is nice, ramps are nice, upper playfield was just replaced by me. I also have a red X- pin scoreboard that goes with it. I had to drill the lock out on the head and have a replacement for that as well. Plastics look good throughout. I also have replacement decals for the inserts and tablecloth area. This is project that is electrical based and out of my range. When it was powered on with the new board it seemed fine, lights lit, drawbridge went up and down, but a coil locked on. A friend replaced that coil (kick out) and then a different one locked on the next time and the board blew out. Open to offers. Easy walk out loading. I can help load as well. I will answer any questions I am able. Selling "as is", Thanks