Selling my Bally Spy Hunter Pinball

This is a relatively rare and quirky game with great music and sounds from the era!
Plays great and has been recently stripped down and shopped out by myself.

The following is new…

New Star Posts
New Flipper Bats
New Drop targets
New Balls
New rubbers
New locks (Backbox and front door)
New levelers and leg bolts
New (NOS) bumper cap, trim ring, body and skirt

I have done the following work….

Memory Cap on the MPU (MPU is squeaky clean, no corrosion now or ever)
High Voltage fuse holder replaced with normal sized one on Solenoid Driver Board
Ground Mods completed on the Solenoid Driver Board
New 5VDC cap on Solenoid Driver Board
All headers on all boards re-flowed
Flakey Connectors replaced with Molex connectors
Re-caped the Sound Board

Condition…

Backglass is super nice with no paint loss or fade (which is rare for this game)
Factory displays are all 100% and very crisp with no spotting. (Voltage pot cleaned and adjusted too).
Playfield has day 1 Mylar, and is polished up nicely. Has a small amount of bubbling by the upper right flipper, but it otherwise very nice.
Cabinet has some fade (typical) mainly on the right side, I have seen worse
Lower cabinet has some swelling…again I’ve seen much worse from this era Bally but it’s the only “con” so I want to make sure it’s known.

This is a fun timeless title. And with the new rubbers it’s not the drain monster that it looks like it should be (don’t let the offset fool you).

Please look at the pictures and ASK QUESTIONS no one likes surprises!