Selling my Terminator 2 to make room for a game coming in a few weeks (or months, who knows). As of now I'm pretty firm at $2400 but I'm open to offers. I tried to price this low due to the touchup right by the flippers. I'm not open to trades as I'm totally out of space and need to get rid of this to make room. Honestly the game is a lot more fun than I expected, but I like my others much more, so it drew the short straw.

You can find a full Google Photos album of the game here: https://photos.app.goo.gl/zMXsABsy4YmX7JnV9

This includes a couple of videos of the playfield, the test error, and a game being played. But for ease of access here's a direct link to the videos:

Playfield/Cabinet: https://photos.app.goo.gl/YmUawxjbdaaZAc5p7
Game: https://photos.app.goo.gl/bGBHsPrRN4Nf9J2h7
Test Error (RTC due to NVRAM): https://photos.app.goo.gl/brcWgwjRuQq6xNEz6

I received this game a few months ago, it was in a home for nearly 25 years and I don't think it was ever once cleaned, nor were the batteries replaced ever. I did a full shop job on it and touched up a major wear mark on the PF near the flippers. The cabinet had some dings which have been filled with bondo and painted. There was also an absurd amount of corrosion on the MPU, so that was replaced with a RD board and a ton of connectors were also rebuilt.

There was also a major wear spot touched up above the right flipper, so there is a piece of mylar there. It is also worth noting the credit dot is due to the NVRAM breaking the RTC feature, you can easily switch to batteries if you'd like.

The good:
- Overall the playfield is very clean, the game was pretty much fully torn down and cleaned.
- Cliffys on the shooter eject and skull. The game will come with cliffys for the other ball locks, but installing them is a pita so I never did those. There isn't any wear around those really anyway.
- New hunter ship
- LEDs throughout, aside from the flashers
- New rubbers throughout
- Flippers rebuilt
- New starposts for the most part (there might be a couple here and there that aren't new)
- Spotlights on the slings
- Orange slingshot protectors
- New RottenDog MPU (though some might see this as bad)
- Many connectors totally rebuilt/re-pinned.

The bad:
- The decals around the legs are pretty wrinkled and torn, but I did install standoffs there, so it shouldn't get any worse than it is
- Some wear around a handful of inserts (see pictures). Most have a small piece of mylar on them.
- The worst wear is around the auto fire hotdog insert)
- Major wear spot touched up above the right flipper. I touched it up and put mylar on it, you can see that here: https://photos.google.com/share/AF1QipPuUOYOL5bIzsNfpNJw02lBcfZLlhgtOzcBx7HfqLZqXCG43V3uP6zNNkCuoMHDSg/photo/AF1QipNfPos0Q4HawBdiJSXRuWB_r0m6O4mgSIxxOXOt?key=ZmhzdXBoaFdUWmxhSUQtbjFlWnBqSGRGbHBBYnJ3. You can also see it in the video.
- Some marks on the sides where the playfield pivots.


I'd prefer local pickup, but am not opposed to shipping.

If shipping, I will not arrange shipping, all of the logistics around shipping are the buyer's responsibility. I can get the game into my garage and wrapped. I will only ship to buyers with lots of positive feedback. I do not have a truck and cannot take the game to a shipping depot, so it must be pickup if that's the case.