Selling my Funhouse that I just finished restoring. Everything was removed from the top and bottom of the playfield. I removed the mylar from the playfield and treasure coved it. The only bad wear spot is the right inlane decal is wearing off. Fixed the mirror hole wear with jb weld and added a cliffy. Repopulated the top with new pop bumpers, ramps, targets, new trap door, star posts, flippers, rubbers, new plastic set, comet 2smd leds. and led pop bumper rings. All screws and hardware were removed and tumbled. I soldered in all new light sockets. All mechs and brackets were removed and tumbled except for the flipper plates which were too big for the tumbler,(they were sanded.) Flippers were rebuilt and all coils received new sleeves.
Everything was removed from the cabinet head and body. Cab was stripped down with a heat gun and then sanded and bondo'ed. Spray painted and then reassembled with new ground braid. Next Gen 2 decals were applied with new legs,bolts,feet,hinges,side rails. Added tilt graphics side blades to the cab and matching apron to the playfield. Lockdown bar and plate were sanded. Translite looks clean with one pinhole, displays works great. Game plays great and everything works as it should except for Rudy's eyes buzz when he looks to the left. I replaced the coil in his head but he still buzzes.
Here's a link to all of the pics:http://s1174.photobucket.com/user/chrisd68/library/Funhouse%20restore?sort=3&page=1