Up for sale is a nice Xenon. I just finished shopping the machine last week. During this process (16-20hrs), the entire playfield was stripped and everything was cleaned. The pop bumpers were rebuilt with all new parts (pop bumper caps, bodies, and bases). The flippers were rebuilt with new blue transparent blue flipper bats and new end of stroke switches. The playfield was compounded, polished, and waxed. I replaced all the post with new blue posts, installed new rubber rings, and coin taker leds throughout the entire machine (color matched inserts, cool white frost in the GI's, cool white frost in the back box, and blue frost around the perimeter of the backbox). An Alltek lamp driver board was installed to eliminate flicker. I also installed a new tube, drop targets, tempered playfield glass, and leg hardware. The mpu has been replaced with a new alltek. Other new parts include instruction cards, balls, barrel spring, remote battery terminal, etc.. There is Mylar on the lower part of the playfield but it wasn't added day 1. Under the Mylar, some inserts show a little wear and there are a few small touch ups. I'm asking $1,850