Hi, I am selling my Rare early sample Tri Zone pinball machine. I can pack, pallet, and ship & I get a real low rate.
What was done to it:
Undercab lighting kit installed (colors can be changed using remote).
New flipper parts installed including new bats.
New Lockdown Bar
Light up flipper buttons mod.
All new plastic acorns on top of plastics.
All Playfield posts were cleaned real good
All metal on PF was polished/cleaned.
Full led kit installed.
Light up start button installed.
All plastics nice with no cracks present.
Full Titan rubber kit installed.
New leg levelers included.
Popbumpers have new rings, skirts, and bodies installed
Light mod installed for eject hole up top.
Spinner is greased up and it spins fast.
A huge amount of upgraded board work was done.
Master display upgraded with new resistors.
Interconnect pins between the drive board and the MPU were all replaced.
All of the transistors on the driver board were replaced.
Power supply rebuilt, driver has new cement wound resistors where needed, new transistors on left side. New roms on the mpu and battery holder mounted off of board. Master display has all sockets chips.
Sound board rebuilt
New volume control inside cab

what's different between the early sample and the normal production run tri zone?
-Different cabinet artwork and colors
-Different Playfied artwork and colors
-Different plastics
-Different pop bumper caps
-Different drop targets
*All of these parts on my game are original

*All of these were made specific to this early production machine

I have only seen one other early sample tri zone, and it was a parts game.

The cab & Playfield are in good condition, except for the previous owner did touch up on some spots on the cab and an area of the playfield. The backglass is presentable, but owner touched up a very large majority of it including the painting the fonts on the bottom.....
$1100 or trade
Thx