Copying and pasting my description from Craigslist because I'm lazy..

I would prefer to trade this machine for another pinball machine, but if you don't have one to trade, I will sell it.


I have a very good condition Terminator 2 Pinball Machine. The original CPU board had the common issue of the batteries on the board going bad and the acid eating away the components. I have since replaced it with a Rottendog CPU board.

Playfield bulbs have been changed to LEDs (The bulbs in the backbox are still incandescent)

A brand new right ramp has been installed

Flippers and rubbers have been replaced throughout, but have been used a bit since. They aren't very old at all.

The Plastic Signs above both ramps have been replaced

The skull is a bit loose and may be missing a screw/nut. Easily fixed.

The lock to keep people out of the backbox and the translite in place is missing and will need to be replaced if you plan to put this in your business. It wasn't an issue for me as it was in my house. I still have the original one that was there, but the person before me must have lost the key and drilled it out then removed it.

A new chrome gun shooter grip on the front has been installed

New legs have been installed, along with black PinGuard cabinet protectors. The previous owner really tightened the legs too much and dug into the cabinet a bit, so I installed these to help prevent that from happening again.

All 3 pop-bumpers have been replaced, but probably need to be looked at. It seems like the metal is shaving bits of white plastic off the pop-bumber body as its being used...kinda hard to explain, but nothing too serious.

All solenoids have been replaced; however, the kicker to get the ball into the shooter lane sometimes has trouble kicking the ball up. This should be an easy fix, but as of right now I'm leaving it as-is and looking for a new machine.

The balls should probably be replaced soon. There are 3 used in the game.

There are a few mods installed on the machine:
-The Terminator Skull Eyes have been replaced with the BriteEyes mod
-There is now a purple 7 LED strip in the ball trough below the flippers
-There is a silver T-1000 figure mod morphing from the center of the playfield above the 3 targets (non LED lighted version)
-Mirror Blades have been installed on the insides of the cabinet to make it pop even more

Artwork on the exterior of the cabinet is in very good condition.

A printed manual will be included.

Overall, this is a very fun game. There is some playfield wear in front of the flippers, the "hotdog" shoot again decal, and a bit throughout the playfield. Also, the Williams Logo on the apron is messed up as there was a sticker there from when the game was originally on route that I removed.

Keep in mind this machine is from 1992, so it is by no means a new machine! I would highly recommend that you get it shopped. It seems like it's due for a little professional love.

I've put a lot of work into it and we've played it plenty. I love the game, but we're now looking for something new for our game room. I'd like a machine from 1992 and up, nothing older than that and in GOOD condition. I have a wedding coming up, so I don't have much cash to add to this machine should you have something more valuable, but please send me all offers! I might be able to make something work.

I WILL NOT ship or deliver this game.

Thanks for looking!!