Williams Grand Lizard pinball machine. A bi-level playfield game.

Original plastics, Lizard head, and tongue are all perfect, as are the ramps.

The bg is a 9.5/10 with one scratch and no flaking. I would suggest sealing it. If you arent familiar with this and want it done, I can do it for you before you take it home.

The playfield is an 8.5. Some insert wear but overall very nice and no sunken or cupping inserts.

I replaced the two lower flipper asemblies completely - Baseplate and up (coils switches mechs), and the two bats.
I did a partial rebuild on the uppers. All snappy.

Some sleeves and springs replaced in heavily used mechs.
Rubbers replaced, posts, plastics cleaned, shopped the lower and mid sections. All but the upper lizard chamber.
Including the rest of the sleeve and rubber kits for you if you desire.

All lightbulbs under the playfield replaced with cool whites to make the inserts pop.
The lower 70% of the game is now Warm leds for a brighter but semi-incandescent look. Lizard playfield and head are still incandescents.

Leg protectors added in green
New plunger spring in green
New barrell spring
New lock mech
All 4 flipper buttons replaced
Tilt bob, bell, and all mechs work great
Both magna save magnets wok great
Power supply board replaced with a Pintech, but also including the original
New playfield glass
New balls
All cabinet Metal in great shape with no rust

This was in a home for 25-30 yrs. No burnt connectors, or bare wood. Boards are clean. No acid damage. No hacks.
Some light Scratches on left side if main cabinet. Cabinet is very nice on 3 sides and not planking. I did a quick clean and wax.

Very nice survivor overall and Ive done a bunch of work for you.

Would consider trading for a Harlem Globetrotters I need for conversion project. Your Harlem can have backglass flaking or a worn playfield, as long as the metal is good, the boards are good or upgraded, under the playfield is nice, or you as cash depending. If interested please reach out with photos and details.

Thank you