Upgrades and work done

Professionally brass plated wireform ramps, apron ball guard, and spirit ring magnet holder. Spirit ring has a NOS decal on it. All plating was done by pinballplating.com

New DMD color LED display (PIN2DMD) with fully licensed color files/software

New Theater of Magic main stairs ramp with new decals and flaps

New nonadhesive playfield protector from http://www.playfield-protectors.com

New trap door with new decals, new upgraded stainless steel Mantis weldment/bracket below, and new coil.

New trunk with new decals and upgraded solid brass bolts

New Pindora Box trunk opto board (A-19749) based on Leon’s Trunk Fix. Leon’s trunk fix not required because of Tangle’s DC motor control board upgrade

New Metal Trunk Opto Interrupter (03-9318) upgrade from plastic

3x new Tangles Smart Eddy sensor board upgrades that auto-calibrate the eddy sensors, a major improvement over the factory manually calibrated sensors and offers better gameplay.

New Tangles DC Motor Control board (A-16120) connected to the Smart Eddy sensors which avoids the ToM Trunk error that happened with the factory design

All backbox boards are hack free and match the original game serial number except DMD board

New Rottendog DMD089 DMD driver/controller board

New upgraded backbox speakers

Full Comet pinball LEDs throughout GI, switched, backbox, coin door, shooter button everything is LED, insert are color matched

Flipper rebuilds on both sides, with new end stops, plungers, linkage, springs, coil sleeves, nylon flipper bushings, crank bars, and upgraded orange silicone rubbers

New PerfectPlay silicon rubbers throughout the entire game, won't crack and produce dust like traditional rubber

Full new Cliffy metal protector kits. The holes are in great shape, no epoxy wood was used, this is not to hide damage but to protect the game.

Refurbished legs, brand new leg levelers with felt bottoms to protect floors, new extra long chromed leg bolts, and new leg-protecting plastic bolt spacers.

Rebuilt jets/pop bumpers

Replaced several targets and switches

NVRAM upgrade (harder on this game as a socket needs to be installed) so the game no longer requires AA batteries to remember scores and settings. This avoids the potential of a battery acid leak damaging the circuit boards.

Metal plastic protecting washers in places like slingshots were replaced with new transparent PETG fender washers to allow more light thought

New flipper buttons

New backbox lock and lock plate, correctly matching WPC95 locks

New backglass lift channel

New Newton fixed ball used in the tiger saw

Set of brand new super shiny pinballs

Additional condition information

There is a chip in the cabinet on the front right below the coin door

The inserts in the tricks area, notably Spirit Cards and Hat Magic have minimal paint loss around them, possibly due to minor insert lifting. The playfield protector mitigates this and Planetary Pinball and Classic Arcades sell a graphic overlay that would cover this