Doozie (Williams, 1968) Pinball Machine

Doozie (Williams, 1968) Pinball Machine.

Gameplay:
The gameplay is easy to understand, but a challenge to master. Collect the X’s by hitting targets 1-5 laid out on the playfield. Pop bumpers light for more points as more X’s are collected. You can open the gate for an “extra ball” by hitting the left, upper target and traversing through the gate. Their are “open” and “close” targets to activate the zipper flippers. Get all the X’s for a Special! Easier said than done!

It’s been completely serviced and shopped. For a full list of what has been done, see below:

-New Playfield Rubbers installed.
-Warm LEDs installed throughout the machine. You’ll never need to replace a bulb again.
-All switches cleaned, polished, and adjusted throughout the machine.
-The Score motor cams have been cleaned.
-All steppers were taken apart, cleaned, and put back together. Renewed.
-All Score reels were disassembled, cleaned, and restored.
-Score motor cleaned and properly lubricated.
All male and female jones plugs were cleaned and polished.
-Backglass was properly clear-coat sealed so no further flaking with occur.
-Coil sleeves replaced on steppers, score reels, and relay reset bank.
-New Pinball ball.
-New Leg Levelers.
-Nyliners replaced on relay bank.
-All playfield plastics cleaned, polished, and look like new.
-Playfield paint touch ups on wear spots.
-Playfield cleaned and waxed.
-New plunger barrel spring.
-New plunger sleeve.
-Glass cleaned.
-Cabinet body cleaned and vacuumed, inside and out.
-2 new locks installed (coin door and back door)
-All metal (side rails, coin door, legs, lockdown bars) has been cleaned and polished.
-All new fuses installed.
-New electrical outlet plug installed.
-Transformer has been properly grounded.
-All New Bumper Ring Skirts installed on all 5 Bumpers.
-Lock relay coil replaced.
-New shooter rod sleeve.
-New shooter rod spring.
-New tilt plumbob and rod (it was missing when I received it).
-5 new lane guides installed to replace the old yellowed, cracked ones.

Backglass is in great shape with only a few small spots noticeable on the lower left.

I’m happy to work with the buyer to ship the pin, or I can deliver it directly to you for an added fee.

*OPTIONAL MODS CAN BE ADDED*
I can installed the EM Score Keeper mod if requested. This pin would now save your high scores right to the machine! Enter scores using the coin return button and flipper buttons. Scores and initials are displayed on an LCD on apron.

I can also install the EM Attract Mod, which allows your pinball’s playfield to flash and dance in many different patterns when your game is in “Game Over” mode.

I am the creator and distributor of these. You can’t get them anywhere else! TheEMScoreKeeper dot com.

**FREQUENTLY ASKED QUESTIONS**
Q: I’ve never had a pinball machine. Do they break easily?

A: EM Pinball machines are some of the most reliable and bullet proof pinball machines available. Even after 50-70 years, they typically stop working because they sat for 30 years and didn’t get played, collecting dust. All they typically need is a good cleaning and adjusting of the switches and they start right up again for many, many years.

Q: Can it be taken a part so I can fit it in my car?

A: Yes, the backbox can be removed with 4 bolts and it lifts off the cabinet. The legs can be removed with 2 bolts on each leg. Once it is disassembled, the pinball machine can easily be carried or moved with a dolly.

Q: If something does need replacement, are parts available to be bought?

A: Yes! The Pinball Resource has parts for nearly any pinball machine at reasonable prices and fast shipping. You can also contact me if you’d like parts. I’m happy to help.

Located in Lakeville, MN.

Keywords: game room gameroom arcade game mancave fun collectible antique entertainment gift man cave present holiday decoration pin