For sale: TX-Sector

I have owned this machine for about 5 or 6 years. When I first got it I did a top side teardown, cleaned the playfield, installed all new rubber (including translucent sling shot rubbers from Titan), cleaned the playfield, plastics, etc removed the tape that was over top of the broken drop target, touched up that area, replaced the broken drop target with a new one and installed a new drop target decal. I addressed any top side issues that I ran into. I think there were a couple missing/broken posts for eg.

I installed LED’s throughout. I also removed the ballast and starter and installed a LED tube in the backbox.

The CPU is very clean and was sent out for professional. The original battery was removed and a button style CR2025 battery and holder were installed.

I did all the ground mods for the boards. I also replaced the capacitor in the cabinet.
Flippers were rebuilt. I installed new leg bolts, leg levelers and new locks for the coin door and head.

I also installed a new sheet of glass and printed off new apron cards.

Displays are working great.

Plastics are in great condition. Only one has a chip by the drop targets. I installed clear lexan washers under the plastics in vulnerable areas.

The cabinet has its usual bumps and bruises.

The metal guide on the left orbit has a tab that has broken free. I only noticed it today when cleaning the playfield so not sure long it has been that way but it does not affect game play at all. I took a close up photo of it. See link below.

Playfield has a large area of factory mylar which preserved the art very nicely!
Outside the mylared areas are still in very good condition. Some of the lower inserts are raised up a bit (level 4 down to the shoot again inserts).

The translite is original and in very nice condition.

Someone made a couple custom metal ramp protectors for the side ramp and an end protector at the back of the ramp where the ball drops onto the playfield.

I have had this game in many league nights and tournaments and it has been a solid and reliable machine. I have it dialed in and playing great. I have been using it lately in the recent virtual ICR tournaments.

Today I vacuumed out the cabinet, cleaned up the playfield and rubbers and installed brand new balls.

Here is a video tour of the machine that I just took:
https://youtu.be/jtDmS23qZ9c

Here is a video of the machine I took a couple months ago:
https://www.youtube.com/watch?v=p09jkj86_5Y

Tons more pics below at link:
https://www.dropbox.com/sh/pp51vq3pp3y7l9h/AACmu7wBdWif6A_pPyoxu4X_a?dl=0