+ Includes unique one-of-a-kind custom Demolition Man topper!!
+ "Poor Man’s Mirrorblades"
+ Perfect tasteful LED lighting throughout. Multiple LED mods!!
+ New MPU board w/ Home ROM + Regular ROM
+ Works 100% correctly and plays great!
+ Great playfield w/ lots of new parts, medium cabinet, medium backbox.

[7 minute read] I'll put some detail into this listing, thanks for reading!

[Updated, I ran out of characters in this description, this description is continued for a few more pages in the discussion thread about this listing: https://pinside.com/pinball/forum/topic/demolition-man-one-of-a-kind-topper-mods-100#post-5873284]

I've been the steward of this Demolition Man since 2017, and it's been well cared for in my living room (it's my only pinball machine).

Owning this game as been absolutely wonderful. It’s a great wide-body Williams, it’s the only game with the dual gun handles on the sides of the cabinet. You can play with either the triggers or the regular flipper buttons. The 3rd flipper has what I believe is one of the best skill-shot ramps because it’s physically wonderful to watch, but also because it’s “all about timing.”

This game is great for every age. Bonus note, I’m including the original ROM, plus I’ve installed the Home ROM which is a rarely-done upgrade.

Now that I’m much deeper into the pinball hobby (and even following the “trending up” podcasts… I can say this game is a truly excellent value. Very fun widebody DMD game!

This is an excellent player's condition game. Wait till you read the mods list.

PLAYFIELD:

The playfield is in awesome shape, and I've scrutinized it. However it has has a single glaring flaw front and center: there is a dime-sized chip out of the paint in playfield, down to the primer. Unfortunately it's right between the flippers, but it's never once caused a gameplay issue. What about touch-up you ask? I didn't dare, because it's right on the neon paint! Neon colors are notoriously difficult to touch up; see image.

KNOWN GAME HISTORY

I picked this game up from the arcade Pinball Wizard in NH when they closed down. So it was definitely routed. I bought it -not- under power, and knowing it needed a new motherboard. I'm so glad I got this fun game!

TRIGGER HANDLES:

The two gun handles on the machine are in mechanically and electronically great shape, solid. The trigger buttons and thumb buttons are good. Visually, they show the common heavy tarnish of wearing through the metal handle coating. This game is a complete head-turner thanks to the trigger handles and wide body alone!

LEGS:

The legs are shiny and good looking but I didn’t scrutinize them closely. All four leg levelers adjust freely but filthy. For some reason 2 out of 8 leg bolts are a head different size.

Modded! Includes one PinGulp cup holder!

FRONT OF CABINET/COIN DOOR:

Has 2 coin mechs which tested good, coin return moves freely. Hinge and molding is ok. Front of cabinet art is ok/scratched, a couple of edge chips taken out. Lock works, has key. Menu system buttons inside door work great. This game has a good menu system and you’ll see the Home ROM installed item.

Bonus: I’ve upgraded all the LEDs on the front of the game: the coin reject buttons have LEDs, the Start, Launch, Extra Ball light-up buttons all have the special miniature LEDs installed (this can be an uncommon upgrade too). I color matched or used the best available LEDs for the lit buttons.

Tilt bob works, coin box included, can’t remember if I tested the slamtilt switch.

** A very important note: this wide-body game is very, very, VERY heavy!!! One of the heaviest. Like same as Indiana Jones… Please be fully prepared to pickup this heavy machine, it’s not one to shimmy into a sedan...

BACKBOX:

The decals on both sides of the backbox are badly scratched (see pictures). Hinges are ok. Requires allen wrench to unbolt, I do not recommend removing the backbox from this machine. The back latch is bent/poor. One backbox-to-cabinet bolt is missing.

The molding for the speaker panel and backglass are good. One of the hook brackets for the backbox speaker panel has the wrong screw, which makes the fit a bit tight.

Knocker works. Vent screens clear, cable protector good. All wiring good. At least a couple new ribbon cables. No backbox lock.

BOARDS/PCBs:

MPU motherboard is new + bulletproofed!
Coil driver board is Rottendog and good.
Special Williams auxiliary board is good.
Sound is good.
Flip-tronics boards in the backbox are good. Flip-tronics opto boards for cabinet flipper buttons are new.
Power supply is good.
Never had any fuse issues with this game.




-----

OH NO I RAN OUT SPACE IN MY DESCRIPTION!! CONTINUE READING IN THE THREAD ABOUT THIS LISTING!

https://pinside.com/pinball/forum/topic/demolition-man-one-of-a-kind-topper-mods-100#po