ARCHIVED

Archived ad

Pinside keeps a record of old ads in its Market Archive, for historical purposes and as a price reference. This ad has been ended by its seller and is now archived.



Game - for sale

For sale: Popeye Saves the Earth

Added: 2020-09-14 22:10:43 UTC • Ended: September 26th, 2020
Condition: Fully shopped/refurbished

0 Pinsiders added this ad to their favorites.

Linked to game



Price

$ 3,000

Item description

Up for sale is a super clean Popeye Saves the Earth. I've had this for a few years but I'm ready to move on. Easy load out from my garage straight to your vehicle; no stairs to worry about. Feel free to message me with any questions or if you want additional photos.

On to the details!

The bad:

* A little wear around the holes and shooter lane
* Cabinet fade on the front and left side

The good:

* Lower and upper playfields have been stripped, cleaned, and waxed 2 weeks ago
* Everything working as expected, ready for your gameroom or route
* Playfield shows very little wear; inserts are all in great shape; there is mylar around the pop bumpers, in front of Bluto covering Olive Oyl, and under the ramps in the inlanes
* Has colored LEDs throughout, including GI/flashers
* All rubber has been replaced with Blue and Clear Titan silicone when I stripped the playfield for cleaning/waxing
* I welded/repaired the Bluto lockjaw scoop and it's working great
* I have serviced the Power Board by replacing a TRIAC to fix a string of GI, replaced a TIP102 at Q94 to fix a string of playfield lights, and replaced all electrolytic caps since the larger 15000uF ones tested out of spec with my ESR tester
* I have removed the battery holder and replaced the 62256 SRAM with a FRAM from Barakandi
* Previous owner installed a coin doubler board (bottom left in CPU board pic) that had a long wire pulling 5V from the axial cap at C31; I replaced the stranded wire with a shorter run using solid core that's out of the way and doesn't risk getting ripped off the board
* I have inspected and serviced the flippers, tightened up linkages and adjusted them and they are working great
* Comes with goodie bag including all original paperwork, a couple unused mylar pieces, manual, and full WPC schematic


Item photos

IMG_20200823_153338.jpg
IMG_20200907_195342.jpg
IMG_20200823_153343.jpg
IMG_20200823_153356.jpg
IMG_20200823_153427.jpg
IMG_20200823_153437.jpg
IMG_20200823_154024.jpg
IMG_20200823_154038.jpg
IMG_20200823_154052.jpg
IMG_20200823_154104.jpg
IMG_20200823_154108.jpg
IMG_20200907_195233.jpg
IMG_20200907_195120.jpg
MVIMG_20200907_143020.jpg
MVIMG_20200907_143027.jpg
MVIMG_20200907_143036.jpg
MVIMG_20200907_143043.jpg
IMG_20200907_195541.jpg
IMG_20200907_195736.jpg

Photos not showing? Make sure your ad blocker plugin is not hiding them.


Added by


Contact

Note! This is an archived ad. No longer for sale!


Seller insights

These are benime's market stats.

All ads

0
1

Archived ads

1
0

Success

0
1

Feedback score

0
N/A

Go to benime's stats page

Listing result

The seller marked this ad as "not sold". The item did not sell through Pinside so there's no listing result.

Item location

Beaverton, OR, US

Forum

Discuss this ad on the Pinside forum

Embed this ad in a forum post




This page was printed from https://pinside.com/pinball/market/classifieds/archive/102516 and we tried optimising it for printing. Some page elements may have been deliberately hidden.

Scan the QR code on the left to jump to the URL this document was printed from.