For sale. The Machine Bride of Pinbot. This was in a home for many years. The batteries leaked and caused it not to function. I rebuilt the CPU board with new molex connectors and headers. Some traces had to be replaced as well. All serial number stickers match on all boards and everywhere else. The playfield was just recently completely torn down cleaned, and waxed. All ramps, plastics, and wireforms were cleaned and polished. All the circuit boards were worked on solder flowed on all molex headers, the batteries removed, NVram installed, Solder flowed on the boards under the playfield, display is bright with no dead or gassed spots on it, both flippers completely rebuilt, New coil on the right side with a little extra power for the ramp shot, New cabinet switches, new EOS switches, Lite-o-matic purple flipper buttons installed, new purple posts through out, all new white rubbers, 3 New Pinballs, and all new premium Comet LEDs tastefully installed. Comet pop bumper led discs installed in red on top with white on the bottom. New laminated apron rules cards. The playfield has some wear here and there along with some planking in places but it plays very good and fast. It's a great players game. It’s working 100% and should last a long time for many years of enjoyment. I can deliver this pinball machine within 100 miles of Philadelphia for a fee as well. Ground floor garage pick up no steps. I can prep and ship this game anywhere. Drop off at coin-op warehouse for over seas purchase is available also.

Plenty of pics below and here is a video of this machine just after it was shopped... https://youtu.be/a7VDCEcm_jg