Update: new $25 stern replacement relay board (revised model to prevent issues) will be installed for the goalie motor control in the next day or so when it arrives. Bullet-proofs the #25 issues for the future.

See the CL ad link for more pics, etc. Selling this outright, or may trade for a South Park, Dr. Who, or other.

The playfield is near perfect. There is a little wear in the mylar itself by the top ramps and a hole, but no wear in the playfield decal or wood at all. No cracked plastics, all complete.

I stripped the entire thing down and performed the following work:
- Service bulletin spring kit included
- All plastics cleaned with Novus
- Brand new blue lane guides installed from Pinball Resource (4)
- New Balls installed (4)
- New legs installed - black
- New leg levelers and bolts installed
- New leg protectors installed ( yellow) - matches black and yellow theme
- Body touch up in black areas to cover nicks/scratches
- LEDs installed throughout 90% of the machine. High quality Ablaze frosted, clear, high output 4-LEDs, and others installed. Replaced all flashers on top of the PF with 4-LED flashers, including the 4 builds within the stadium (prevents the issue with stadium melting from hot 89 incandescent bulbs)
- multiball sensor pad connector repaired
- Goalie motor relay assembly replaced with upgrade from stern
- New rubbers installed all over (black)
- New super bands installed on the flippers (black)
- New Stern rails installed (the kind with the rounded button protector sides to cover and prevent decal wear around the buttons)
- All 4 drop targets replaced with new
- All drop target decals replaced with NOS
- New Foam Soccerball replacement installed
- Plunger rebuilt with new springs/clip/tip
- New locks installed
- New soccer ball target decals
- Original key fob plastic included
- Original manual included
- Cleaned plungers and replaced or cleaned coil sleeves on all 3 flipper assemblies, drop target assembly, and one outhole/upkick assembly