You're currently viewing posts by Pinsider cujo.
Click here to go back to viewing the entire thread.
Picked up a used Zizzle POTC pin for Christmas gift and all the LED's were working. But now the blue one to the far left of the group of five in the mid center of the playfield will not illuminate. I have taken off the bottom of the pin to get access. This LED is like nothing I have seen before. It looks like it has it's own little PCB on it, as do each LED's in the game.
Anyway to test, repair or find a replacement LED for this? ..hopefully before Christmas?
Thanks!
Quoted from zizzlemeplease:just unsolder and solder in a new one, pay attention to the direction of the "anvil" so you get the polarity correct. had to replace several of them in a couple zizzles. "anvil" being the shape of the metal inside the LED itself, kinda |_/| , if you look very closely. 5mm water clear wide angle (x-color) if you can get them, but the dome tops are ok too. find them ebay or amazon.
a little easier said than done, they dont give much of anything for wire length. I've snipped them, stripped them 1/8" to solder connect back in and a dab of hot glue to re-insulate it.
amazon.com link »
amazon.com link »
is the type arcade buttons you'll need for good fit and performance, some drilling required. theres also possibility of finding higher quality-capacity momentary switches for mounting on the existing pcb's in the stock button assemblies. wimpy flipper button switches was zizzle killer #1
No shaker motor in this one (was that guy joking?)..lol
Thanks for the reply but your two links are to flipper buttons, not the LED's I seek.
Quoted from zizzlemeplease:ebay.com link » 50pcs 3mm Red Yellow Green Blue White Led Assortment Kit 10pcs Per Color 3049
ebay.com link » 25x Round 5mm Blue Led Diffused Lens Kit Assortment Pack T 1 3 4 25pcs Usa
cool lookin..
ebay.com link » Pirates Caribbean Jack Sparrow Logo Model Display Decor Ornament A379
Thanks. Your second link worked to the blue ones, which are what I need.
You're currently viewing posts by Pinsider cujo.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/zizzle-potc-led-out-replacements?tu=cujo and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
