(Topic ID: 240133)

ZACCARIA Ten Stars game lock relay needed


By aoca

3 months ago



Topic Stats

  • 16 posts
  • 6 Pinsiders participating
  • Latest reply 3 months ago by aoca
  • No one calls this topic a favorite

You

Linked Games

Topic Gallery

There have been 2 images uploaded to this topic. (View topic image gallery).

Pinball (resized).png
IMG_1401 (resized).JPG

#1 3 months ago

Need some help. I have been searching for some time now for a part for my pinball machine. i need a game lock relay. It uses coils Z 27 1000 and M 29 1000. These are Williams parts and readily available. Its the metal unit that attaches to the board. Hoping someone can direct me to a source for parts or ideally someone has this part which I can purchase.In he photo it is the lower unit that I need

IMG_1401 (resized).JPG
#2 3 months ago

http://www.pbresource.com/ Call and ask Steve. Or put a wanted classified on Pinside.

#3 3 months ago

Maybe you could but a similar Williams frame and move the rest over. Btw..i also own this game.

#4 3 months ago

Contacted pbresource, awaiting their reply. Bonzo71, the plate plates misalign ad the spring is worn out.......Hoping someone has a Zaccaria game of the era (1976) and I can find the unit.

#5 3 months ago

pbrsource does not have the unit I need. `

#6 3 months ago

You only need the metal bracket and the spring? Can you fabricate something?

#7 3 months ago

Unless you're a stickler for originality you should be able to make one of the interlock relays from ebay work.

#8 3 months ago

I tinker with the machine but don't feel confident doing my own rebuild. The metal bracket is good as far as I can see, the plastic plates don't pull in or align properly. First suspect is the spring. (?)
Or maybe I should be looking elsewhere? When a game is started the ball index is all over the place. It for the most part plays one ball and game over. It will register two or three balls at the start of a game, but goes to game over when the ball drains out. A tech who looked at the machine suggested it was the game over relay. Am I looking for the right thing?

#9 3 months ago

I'll need to see a high quality scan of the schematic from (for example) Staples ($2) or Kinkos ($6)

#10 3 months ago

I have the original schematic. Quite large, Scan in pieces? It's a bit faded in parts for being 40 + years old

#11 3 months ago

Do you have an office supply store with a large format scanner in your area?

#12 3 months ago

I can check. I don't know that they will.

#13 3 months ago

PM you email and I can send a schematic scan.

#14 3 months ago

These are the 4 circuits that can make the game go to game over. If the Lock relay isn't activating when this happens, put slips of paper in these 3 switches to see if one of them is causing the Game Over relay to "trip".

Pinball (resized).png
#15 3 months ago

I'd also be interested in a schematic scan if it becomes available, thanks!

#16 3 months ago

Thank you Howard R for the info.I will try your suggestion

Pinwizkid contact Bonzo71, he provided me with a pdf scan. I don;t want to copy and distribute his material without his permission

Promoted items from the Pinside Marketplace
$ 279.95
$ 7.00
Electronics
APB Enterprises
From: $ 7.60
Cabinet Parts
PinBoltCaps
$ 229.99
Lighting - Other
Lighted Pinball Mods
$ 279.95
$ 149.00
$ 9.99
Eproms
Matt's Basement Arcade
£ 58.00
Cabinet - Decals
Sillyoldelf Mods
€ 4.20
Flipper Parts
Buthamburg
$ 218.00
$ 26.50
Playfield - Toys/Add-ons
The MOD Couple
$ 9.99
Eproms
Matt's Basement Arcade
$ 20.00
Playfield - Decals
Flashinstinct
£ 49.00
Lighting - Led
PinballToys
$ 5,799.00
Pinball Machine
Operation Pinball
$ 49.99
Lighting - Led
Comet Pinball
$ 28.99
Lighting - Interactive
Lee's Parts
$ 49.00
Gameroom - Decorations
Pinball Photos
$ 14.95
$ 30.00
Electronics
Third Coast Pinball
From: $ 42.00
Cabinet - Shooter Rods
ModFather Pinball Mods

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside