I am reviving a power supply from a Magic Castle for a friend and I need some advice on the two 10,000 uf, 16v filter caps. They each have four legs, which I have not seen before. Can they be replaced with a two-legged snap-in capacitor and if so, how would they be oriented on the board? Is the black stripe on the existing capacitor negative? Positive?
Also, regarding the 100 uf, 350v filter cap in the HV section; can it be replaced with a 150uf 350v cap that I have on hand for Bally power supplies? The HV sections appear to be very similar.
Thanks.