Working on a friends Zacarria Supersonic and we are having an issue with the left flipper seemingly being weak. Here is what I have done so far:
Replaced coil
Replaced EOS switch
Replaced wiring between coil and EOS switch
Cleaned and adjusted the cabinet switch
Sanded Jones connector
Re-soldered old connections to jones connectors
Checked wiring for any damage.
I am at a total loss of what to do here. There are no Supersonic schematics to be found and this is the last issue we have! Hoping someone with some Zac experience can give me a hand if there is anything else I should check for!
Thanks in Advance!
Supersonic1 (resized).jpg