Just got and installed the T-Rex alive mod. I also have the Turtlecom. Both are awesome!

Question for folks....I want to leave my start button blinking but I don't want T-Rex moving in attract mode. How can I go about doing this? I disconnected the wire from the start button thinking that this was a trigger, but as I found out it pulls power from this wire and the T-Rex lamp is what triggers motion in attract mode.

Honestly, I'd prefer to have it on during attact mode but the reason I don't want movement during attract is that I worry that this will cause the servo to die sooner. I often will leave my games on for hours. If I am overly concerned about the servo dying, let me know and I will enjoy it.

Basically, I am thinking that I need to disconnect the wire that goes to the Start button and provide power separately to that wire but only during gameplay.

Did you mean the Start button (rather than lockdown button)? Turning the start button off during attract mode stops the movement but I want my button blinking.

Thanks,

I do have the instructions. To stop attract mode movement, you need to turn off the start button light. I am trying to have a workaround. Where the button can blink but I don't get movement during attract.

Thanks

Thanks. I do leave it on for a few hours/day. Maybe 4 hours or so per day.