Hello everyone
I open this subject to present my latest developments and so you can also give your opinions, comments and ideas.
My adventure started in 2014 after the acquisition of my TZ, you can see the beginning of this adventure on the French forum "Flipjuke"
https://www.flipjuke.fr/imprimante-mod-autre-t105128.html?hilit=mod%20tz
Many of you already trust me here I thank you, which motivated me to open my Pinside Shop
https://pinside.com/pinball/market/shops/1058-yoyokopter-mods
I am interested in the Ghostbusters post to prevent the outlane Drains, nice idea. However, I am not happy with the colours you offer: light purple and white, because these colours are far to recognizable on the playfield, just my opinion. I would appreciate less offensice colours like dark purple, dark green, dark blue or even black.
Are there any plans to offer further colours for the post?
Your crossbow mod is awesome for TWD! It fits perfectly and the install was simple. Everyone that plays it loves the laser.
The save posts make the game more enjoyable for newer players. Before they were installed, guests would play one game and walk away even with the outlanes closed down.
Thanks again for all your hard work creating these mods!
Quoted from Zora:I am interested in the Ghostbusters post to prevent the outlane Drains, nice idea. However, I am not happy with the colours you offer: light purple and white, because these colours are far to recognizable on the playfield, just my opinion. I would appreciate less offensice colours like dark purple, dark green, dark blue or even black.
Are there any plans to offer further colours for the post?
Hi Zora , the pink is much better in reality than in the photo , i can order black , blue sky and blue look on the picture for the blue , there is not a lot of color in flexible plastic
Thanks Matts for the reviews 
Love my crossbow on TWD
Its been on my game for 2 months
And works perfectly , great mod !
Quoted from thunderking50:Love my crossbow on TWD
Its been on my game for 2 months
And works perfectly , great mod !
Thank's a lot
Quoted from shovelhed:Afm mod is bad ass! Great job, are these forsale?
Thank's , I try a Green version, like the saucer on the playfield , and the set will be for sale
Quoted from yoyokopter:Hello , Save post for Ghostbusters are available in black
do you have any assertions regarding the durability of your safe posts?
maybe you also could post a video of the safe posts in action so we could see how they behave, means how they bounce the ball?
Hi , here a vidéo to see how they ball bounce on the save post , the vidéo is not easy to do, I put my phone on the glass and I play
For the durability, on my GB, I'v got more of 700 play with the save post
Hi , my news mod for the ACDC pinball , to see when the Horn insert is light , because it is not very visible in play
Hi , my last Mod for ACDC for the Bell , cover to mask the ugly stand
IMG_20180708_210612 (resized).jpgIMG_20180708_210622 (resized).jpgIMG_20180708_210635 (resized).jpgIMG_20180708_210650 (resized).jpgPicked up yoyokopter's GB Pro library mod and it's awesome! Very well crafted and the lighting is great! I love it!
Thank's Benjn
My last mod for ACDC , the cannon mod , it is not a cut toy but a real 3D print creation for the acdc cannon , hand painting and plug and play
Quoted from yoyokopter:Thank's Benjn
My last mod for ACDC , the cannon mod , it is not a cut toy but a real 3D print creation for the acdc cannon , hand painting and plug and play
Interested in this. Though my interest is tempered by hating the cannon mech.
Do you have any thoughts about adjusting it so the ball doesn't hit the underside all the time? yoyokopter
IMO it's one of the worst mech design in all of pinball, and semi-ruins ACDC. Even with washers on mine jacking the height up ~3mm, it still hits the bottom of the cannon all the time, and insta-drains. It's just too low. Plus it completely obscures vision of the right outlane. All the AC/DCs I've played are the same. Though I've seen a couple streamed where this doesn't seem to happen.
Hello , the cannon mod does not hide the outlane anymore than the original plastic , and i'v not see more hit with the ball
Quoted from RVH:Nice. The eyeball and the dead pool shooter rods look really nice but I’m a sucker for smiley faces myself.
Well done!
Thank you RVH
Quoted from Alby:Have you ever done a ghostbusters one?
Yes I do it , you can look here for my mod , it's under construction there is not all my mod : https://sites.google.com/sfr.fr/yoyokopter-mod/ghostbusters
Slimer1 (resized).jpgslimer2 (resized).jpgslimer3 (resized).jpgQuoted from shovelhed:What ever happened with your AfM mods?
Hi , it's ok you can look here
https://sites.google.com/sfr.fr/yoyokopter-mod/attack-from-mars
You can see all my last mod on my Website : https://sites.google.com/sfr.fr/yoyokopter-mod/accueil
Quoted from yoyokopter:You can see all my last mod on my Website : https://sites.google.com/sfr.fr/yoyokopter-mod/accueil
Im in, How do I order the Flintstones quarry wheel and Addams bookcase mod, not the light cover one?
Merci
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/yoyokopter-mod-development-and-reviews-thread?hl=bent98 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Marseille
Meerbusch
Boulder, CO
Ottawa, ON
Zürich
Oldham
jai acheter un cannon il y a 3 mois 
Super beau mod Lionel 
Helsinki
Melbourne