You're currently viewing posts by Pinsider sparky672.
Click here to go back to viewing the entire thread.
Quoted from Billc479:You did put the resistor in parallel, so you likely reduced the effective resistance by half(Assuming you used the same value as what the SMD was).
Based on the quoted post, it sounds like he may have put it across the entire board, so I think it would be in parallel with the existing resistor + LED.
Quoted from Billc479:Could be, but either way, he definitely reduced the overall resistance.
It's in parallel with the whole assembly, so measured through/at the LED, the current and voltage are the same. Like you said before, try it in series with the LED.
You're currently viewing posts by Pinsider sparky672.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/yoppsicle-socket-free-leds-for-classic-bally-stern-vids-review?tu=sparky672 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Manhattan, IL