Quoted from Homeslice666:I did not realize the solenoid table listed the associated transistor. So it is Q14 I need to inspect/replace. Thank you Grumpy and Slochar!
Flasher #7 was pulled by Williams. I'd like to reinstall this in the future.
Were these flashers working before and then failed?...or have they never worked? (depending on answer, a different course of troubleshooting)
Just to make sure, since it wasn't mentioned - both bulbs are the correct #89's? You said they were dim, usually when the driver transistor fail they fail completely dead...only very occasionally they fail partially.
slochar - keep in mind that there is only one A/C relay, and if the AC relay is bad it will affect all of the switched coils & flashers, not just one.