I've done it with WPC flippers. They are almost drop in replacements, but the diodes are backwards and you need to measure which side is low/high coil.
You're currently viewing posts by Pinsider castlesteve.
Click here to go back to viewing the entire thread.
I've done it with WPC flippers. They are almost drop in replacements, but the diodes are backwards and you need to measure which side is low/high coil.
not from under the pf. Effectively, I took the original Xenon flipper assemblies out. Measured the impedance across each diode (which will tell you which is the high and low current coils)... and matched the wiring up to the new WPC flipper assemblies. Also changed out the EOS switches to high current normally closed.
You're currently viewing posts by Pinsider castlesteve.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/xenon-replacinf-flipper-mechs?tu=castlesteve and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.