Trying to bring a recent pick-up back to life.
No general illumination.
I replaced both the bridge rectifiers on the rectifier board (AS2518-54)
my test point are now giving the following readings:
TP1 +8.02 vdc
TP2 +256 vdc
TP3 +16.23 vdc
TP4 +7.41 vac
TP5 0
still getting no lights.
TP4 is your GI, so if you have 7vac, you have a connection problem further down the line (are the connector pins/sockets all tarnished? ). The test point is after the fuse, so we can assume the fuse is good.
TP5 is the solenoids.
Post a CLEAR, FOCUSED, WELL LIT photo of the board with the connectors removed so we can see the pins/sockets.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/xenon-power-question and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Lexington, KY
Sana'a