Hello, I have Xenon with a (green ?) wire that is not connected and I can’t figure out where goes. I am going blind from looking at the schematics. This wire is under the Capture Ball light (with 2 brown/white wires) and above the drop targets. Can someone take a picture of theirs for me. Thank you very much.

2C66FEDC-C0C7-4721-B4E7-5EE27D95708B (resized).jpeg

Thank you for your help! The green wire does not have a trace however, I think you might be referring to the opposite side of the playfield sine you mentioned the arrow. I attached another picture of the top side for more clarity of where the wire is located

1DB6C253-A1C2-4EE8-921C-FD1099B006F4 (resized).jpeg

The wire may be light blue. It is faded.

That looks like what I am referring to. I will get the playfield back in the cabinet and check it out. I will post my findings so you know. Thank you for the picture and schematic.