Xenon
Bally, 1980Hello, I have Xenon with a (green ?) wire that is not connected and I can’t figure out where goes. I am going blind from looking at the schematics. This wire is under the Capture Ball light (with 2 brown/white wires) and above the drop targets. Can someone take a picture of theirs for me. Thank you very much.
2C66FEDC-C0C7-4721-B4E7-5EE27D95708B (resized).jpegThank you for your help! The green wire does not have a trace however, I think you might be referring to the opposite side of the playfield sine you mentioned the arrow. I attached another picture of the top side for more clarity of where the wire is located
1DB6C253-A1C2-4EE8-921C-FD1099B006F4 (resized).jpegAn image here but a bit obscured by the tube shot socket.
https://pinside.com/pinball/forum/topic/xenon-clubmembers-onlytry-xeeeenon/page/13#post-5609765
See if it has continuity with a blue wire on your rectifier board connector J1
The drawings kinda shows they used a blue wire in a lot of places ... but I suspect it's the feature lamp bus
Xenon blue wire (resized).jpgWanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/xenon-playfield-detached-wire-help-1 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Kittery, ME