You're currently viewing posts by Pinsider chas10e.
Click here to go back to viewing the entire thread.
I tried to just "drop a scale" down on each one thinking they'd be only 2 sizes.
When I first got it & cleaned it up as good as I could I simply put things back as I took it out & a couple of the posts were incorrectly placed I guess. I also move the left tube strap close to the end of the tube
having redone it helped ME out, the ball doesn't hang at times going in the tube entrance anymore.
if you know where I can get the proper wire for the tube switch that would be great ( my original broked & I bendied-up an extra coin switch wire)
I didn't snap a pic of them but in my post above I think I measured 2 inches
the posts holding the plastic were 1 5/8"
Quoted from chas10e:there were 4 different sized posts I had (2x) 1-1/4" ; 1-3/16" ; 13/16" ; 1/2"
I showed a pic of how I reinstalled them
the switch cover were (2x) 2"
the plastic around the pop were (2x) 1-5/8"
hope this helps
[quoted image]
[quoted image]
You're currently viewing posts by Pinsider chas10e.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/xenon-gray-posts?tu=chas10e and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.