Xenon
Bally, 1980So...My xenon has had a few lights out around the perimeter of the backbox. I figured it is about time I fixed it.There was a cut wire back off the connector. It's green yellow. Any xenon owners want to tell me where it goes to? I think old wire was pulled for whatever reason. Thanks.
Looks like maybe #6. Wire code for green yellow is 43.
http://mirror2.ipdb.org/files/2821/Bally_1980_Xenon_Manual_And_Schematics.pdf
Thanks Insane for taking the time to look into this for me. Unless #6 is something I don't understand, I think that is pin 6 of the connector in the picture. I do have continuity from that end to the aux board. I just need to know where the other end goes. The harness seems to go to the playfield.
Quoted from Jeewiz13:Thanks Insane for taking the time to look into this for me. Unless #6 is something I don't understand, I think that is pin 6 of the connector in the picture. I do have continuity from that end to the aux board. I just need to know where the other end goes. The harness seems to go to the playfield.
The way I read it, it goes to #6 bulb set in the ring circle insert of the backbox. But i could be very wrong. Do you know the number of the connector you are working with?
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/xenon-cut-wire-location?hl=jeewiz13 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Chicago, IL