You're currently viewing posts by Pinsider Tyamry.
Click here to go back to viewing the entire thread.
I am not getting any sound with my old boards so I swapped in a newer Alltek MPU, still nothing. Then put in a newer Solenoid driver with the newer Alltek and still no sound? Any suggestions what I should try next? Both boards work in the game I swapped them from.
Yes. With the old boards if I push the reset switch on the sound board the voice comes back, talks a little then nothing.
Quoted from LouMatt:There are 2 volume pots on the sound board...one for speech and one for music if I remember right. But there are also sound settings, and those could be disabling background music or something. Definitely go into the settings on the game and understand what it is set to now, and what you want it to be set to.
The ribbon cable between the 2 sound boards usually needs a little wiggle too.
I've already tried that. Thank you for your suggestions.
You're currently viewing posts by Pinsider Tyamry.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/xenon-clubmembers-onlytry-xeeeenon?tu=Tyamry and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.