You're currently viewing posts by Pinsider Spudgunman.
Click here to go back to viewing the entire thread.
Quoted from dothedoo:What a great deal!
Backglass chasers are controlled by the Aux. lamp driver. Reflow the solder joints on the board, they're often cracked.
Thanks, got it up and running. I am missing two posts that are blocking the spinner and the matching post under the tube area any one got the number for them
Quoted from dothedoo:Mini post?
[quoted image][quoted image]
Yes those they 8-32 by 1/2 inch?
Quoted from JeffZee:I too replaced that post with something chunkier that I found in my scrap box.
[quoted image]
Yea I likely do the same your post is bent and mine two were broken. Seems like a common flaw
Quoted from JeffZee:I don't like using incorrect parts, but I also don't much like the washer look. The chunkier post covered the existing hole damage without a washer. The metal post to the left of the tube ramp was even worse. The hole was so blown out that a previous owner had switched to a plastic post. The playfield was worn to the point of no going back so I stuck with it.
[quoted image]
Not bad at all
Quoted from Gnrwarkfc:Hey gang another question! On my Xenon the previous owner really has changed the game to way more reds than blues on the game lighting wise. Specifically he changed the small tube lights to red leds. Does anyone know where you can get those lights in blue?
You would want to just purchase some new blue LED and solder them
You're currently viewing posts by Pinsider Spudgunman.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/xenon-clubmembers-onlytry-xeeeenon?tu=Spudgunman and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.