Hi there,

apologize for my English.

has someone of you ever been so stupid like me to "add" a spinning disk to an X-Men Pro ?
don't ask me why, but beside the captive ball mod,this was a logical consequence to enhance the game experience.

this is a none reversible modification

WP_20170810_23_22_12_Rich (resized).jpg

WP_20170810_23_22_03_Rich (resized).jpg

Not perfect but I'm happy, it's more centric than it look like on the pictures.

WP_20170810_23_21_58_Rich (resized).jpg

WP_20170810_23_22_50_Rich (resized).jpg

coming back to my question...

If someone did this in the past ... I'm looking for information exchange, share some impression / ideas.
At the moment the magent is working, next step - how to connect the motor , about wiring,
but background information about the functionality also welcome.

TIA

best regards

than'ts the thing to figure out ...

I ordered a Relay with harness and do some research about the wiring, we'll see how this work out.
not knowing if the motor controls of the LE is in the code of the Pro.

other idea (and preferred one) is the use of an external controller board, triggered by the impulse of the magnet ...
a board like the DK Pinball Pig 2. (unfortunately no longer available)

if someone knows alternatives, I'm open for suggestions

no, that's true, and not what I wanted to do ...
I was just wondering if the Pro code include part's of the LE's one ...

I'm not sure, but I have in mind that ELi's Ramp Illumination Kit for TRON Pro work's so nice, because TRON Pro Code include LE parts of the Ramp illumination...

so hope that might be the case for X-MEn Pro with the Disco code of the LE

anyway.. negotiating at the moment how a pinduino might help

That's what I'm interested into, too

Thanks!

any pictures of how the three relays under the playfield are wired/connected are also welcome

I made this, reduced air bails, just made the mistake to put rubbers on that where to thik, with thinner ones works perfect for me