Quoted from ShadowFlame76:I have an X-Files pinball and after about an hour and half or so it begins to reset. I am thinking it's an overheating issue of something on the IO Power Driver Board. I have read that the +5v can be an issue? I have included a picture of the IO Power Driver Board. If there is anything obviously wrong please point it out.
Again, it works fine for about an hour and a half before it starts the reset issue.[quoted image]
Oddly enough mine would get angry too, the board at the top left would get up to 180F!
I installed a grill and fan in the unused speaker opening to pull fresh air in and it was very happy after that.